1224 1/2"-4" 120V 60HZ NPT
In stock
CAT
26092
The Model 1224 threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-duty conduit, as well as rod up to 30 Rockwell C. An induction motor helps minimize noise. A special capacitor-start / capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced. 1/4"-2" Universal Die Head: 2 1/2"-4" receding die head allows cutting of tapered or straight NPT/NPSM. Constant and proper lubrication of dies and workpiece with through-head oiling. Motor control Reverse/Off/Forward, heavy-duty rotary-type and integral foot switch. Two-speed gear box 3:1 ratio. Chuck is hammer-type with replaceable rocker-action jaw inserts. Cam action rear centering device. Self-priming, gerotor-type oiling pump is automatic-reversing and has constant flow. Oiling is done throuhg the die head. Standard Equipment: 26132 - Diehead, 711 SO Univ L/Dies; 26152 - Diehead, 714 SO Univ Recd L/Dies; 26192 - Dies, 1224 2-1/2" - 4" NPT HS; 26212 - 1/4"-4" Wheel Type Cutter; 26217 - 1/4"-4" Blade-Type Cutter; 33125 - Wheel, Cutter F229; 46030 - Key, Hex 3/16, Key, Hex 7/32, Key, Hex 1/4; 47795 - Dies, Univ 1/2-3/4 NPT; 47750 - Dies, Univ 1-2 NPT; 70835 - Nu-Clear Thread Cutting Oil; Wrench, 3/4 COMB.; Tool Box
Unit Weight | 509 lb. / 231 kg |
---|---|
Voltage | 120V |
Pipe Capacity | 1/4 - 4 in. |
Power Source | 1 1/2 HP Single-Phase Motor |
Spindle Speed | 36/12 RPM |
Write Your Own Review